WhenFailed metal with sound support
FixReplace the chase cover
CheckMatch the chase and chimney openings.
24/7 emergency line
Replace Your Chimney Chase Cover in Kissimmee
Replace the broad metal top without overlooking the chimney connection.
- Licensed and insured
- Same-day service
- Locally owned and operated
- Family run
Get a Free Written Estimate
Takes about 30 seconds
Got It
Thank you. We will call you to arrange the free inspection.
Or call us at (689) 361-5599
Identify the broad cover on a framed chase
A chimney chase cover spans the top of the enclosure around a manufactured chimney. It is different from the smaller termination above the chimney pipe. The broad cover must manage water across its surface while leaving the pipe and its required clearances correctly arranged.
Homeowners may describe a failed assembly as a chimney chase cap or request chase cap replacement. We identify the actual pieces before recommending work. Replacing the termination alone will not repair a corroded cover beneath it.
Fit includes shape as well as dimensions
A custom chase cover needs the right outside measurements and the correct openings for the installed system. Its shape should discourage water from collecting on the broad metal surface. The collar and nearby termination details also have to cooperate with the chimney manufacturer's requirements.
A stainless steel chase cover may be suitable where its fabrication and connections fit the application. Metal choice alone cannot compensate for an incorrectly sized opening or a poor drainage shape. The complete arrangement determines the repair.
Check the material beneath the failed top
Chase cover repair is not always enough when water has already affected the supporting enclosure. The top edge, sheathing or framing may need attention before a replacement cover can sit securely. Closing the opening without assessing visibly deteriorated support can leave the new metal on an unreliable base.
We explain any separate chimney chase repair that becomes relevant. Not every stain establishes hidden rot, but observed soft or damaged material should not be ignored simply to finish the cover job quickly.
Keep the termination compatible and accessible
The broad cover and the chimney termination perform different roles. Altering the pipe, restricting its opening or substituting an unrelated cap can affect the venting system. The cover replacement must respect the identified chimney rather than treating its pipe as an ordinary roof penetration.
Our Kissimmee team discusses those details before arranging chase cover replacement. We also identify any remaining concern with the enclosure or venting, so a new metal top is not mistaken for a complete repair of every part below it.
Choosing the Right Repair
WhenLimited serviceable defect
FixAssess whether cover repair is suitable
CheckRetained metal must still shed water reliably.
WhenDeteriorated enclosure below
FixRepair the supporting chase first
CheckDo not attach new metal to unsound material.
Materials Matched to the System
- Fabricated cover metal
- Material and shape are selected for a compatible weather-shedding assembly.
- System-compatible collars
- The chimney connection follows the identified system's requirements.
What Determines the Job
- Cover dimensions and openings
- The chase layout determines fabrication rather than a universal size.
- Support condition
- Deterioration below the metal can require a separate enclosure repair.
Free Inspection First. Then 10% Off the Service You Book.
Book within 72 hours of your free inspection and receive 10% off the service.
Signs This Job Is Due
A rusted or poorly fitted chase cover can let water into the enclosure around a factory-built chimney. We provide chimney chase cover replacement in Kissimmee, with the cover measured for the chase and coordinated with the existing venting. A free inspection helps separate cover damage from deterioration below it.
- Rust or perforations across the broad top
- A cover that holds standing water
- Loose or distorted cover edges
- Water damage near the top of a chase
What the Visit Covers
- Chase dimensions and opening positions
- The supporting enclosure condition
- Compatible cover shape and connections
- Any separate termination or chase repair
Proudly American
Family owned and operated, with upfront pricing and a workmanship warranty on every repair.
Questions Homeowners Ask Us
What is a chase cover on a chimney?
A chase cover is the flat metal sheet that caps the top of a chimney chase. The chase is the framed box that hides the metal flue pipe of a prefab fireplace. The flue passes up through a collar in the cover, and the chimney cap sits on top. The cover keeps rain out of the box and off the wood framing inside.
How much does a chimney chase cover replacement cost?
Chase cover replacement cost depends on the chase size, the metal and the number of flues. Rotted framing under the old cover adds to the job. Stainless steel lasts longer than galvanized and costs more up front. The inspection checks the framing first so your estimate covers the whole job.
Is a chase cover the same as a chimney cap?
No. The chase cover is the large sheet that closes the top of the whole chase box. The chimney cap is the smaller hood with a screen that sits over the flue pipe itself. Both are needed on a prefab chimney, and a leak can start at either one.
Why does a chase cover rust?
A chase cover rusts when it is made from thin galvanized steel and water sits on it. Flat covers sag in the middle, hold puddles after rain and rust through, which then lets water drip into the chase. A stainless steel cover with a raised center and cross-breaks sheds water and resists rust far longer.
Rated 4.8 of 5
from 438 reviews
Chimney & Fireplace Brands We Work With
Related Repairs We Handle
Book Your Free Kissimmee Inspection
- Free inspection and written estimate
- Upfront pricing, no hidden fees
- Family owned and operated
Got It
Thank you. We will call you to arrange the free inspection.