Skip to content
(689) 361-5599 Request an Estimate

24/7 emergency line

Professional Chimney Waterproofing in Kissimmee

Protect suitable masonry after the damage and preparation needs are addressed.

  • Licensed and insured
  • Same-day service
  • Locally owned and operated
  • Family run

Get a Free Written Estimate

Takes about 30 seconds

Or call us at (689) 361-5599

Surface protection cannot replace repair

Brick chimney waterproofing aims to reduce water absorption through a suitable masonry surface. It does not bridge missing mortar, reconstruct a crown or correct defective flashing. Those components need their own repair when they are responsible for water entry.

This distinction matters when a homeowner asks for chimney sealing after seeing a stain. The stain does not establish that the masonry surface is the source. An inspection helps determine whether a chimney waterproofing service is appropriate or whether another defect needs attention first.

Consider what is already on the brick

Paint, older coatings, surface deposits and previous repairs affect product suitability. A chimney sealer should not be applied without understanding the existing surface and how the chosen product is intended to work. Coating over incompatible material can make future repair more difficult.

A suitable chimney water repellent should be selected for the masonry and its moisture behavior. Vapor-permeable products can allow drying while reducing liquid-water uptake, but application requirements still depend on the product. The description 'waterproof' is not a promise that the entire chimney becomes impervious to every leak.

Preparation is part of the treatment

Open or deteriorated joints need appropriate repair before treatment. The surface also needs the cleaning, drying and condition required for the selected application. Applying a product to wet, loose or contaminated material may prevent it from performing as intended.

The work should therefore be scheduled around real preparation and curing requirements. We explain why the chimney may need masonry work or drying before it is ready, rather than presenting those steps as optional extras to a spray application.

Keep the rest of the weather system in view

A waterproof chimney surface still depends on its cap, crown and roof junction. If water is entering through those parts, treating the brick may leave the original symptom unchanged. Our Kissimmee team keeps the surface treatment tied to the findings so the work has a clear purpose.

After treatment, follow the product's care requirements and keep future cracks or top damage under review. New defects can introduce new water paths. Surface protection is one part of chimney care, not a replacement for maintaining the whole assembly.

Choosing the Right Repair

WhenSound suitable masonry

FixConsider water-repellent treatment

CheckConfirm product compatibility and preparation.

WhenOpen joints or failed bricks

FixRepair before treatment

CheckSurface protection cannot replace missing material.

WhenWater entering at a junction

FixRepair the junction

CheckMasonry treatment will not redirect that water path.

Materials Matched to the System

Vapor-permeable water repellent
Selection depends on the surface and the product's intended masonry application.
Compatible preparation products
Cleaning methods must suit the retained masonry and any existing finish.

What Determines the Job

Surface condition
Repairs and coating removal can add preparation before treatment is possible.
Accessible masonry area
The area and safe access determine the practical extent of application.

Free Inspection First. Then 10% Off the Service You Book.

Book within 72 hours of your free inspection and receive 10% off the service.

Request an Estimate

Signs This Job Is Due

Chimney waterproofing belongs on masonry that is ready for it. Our Kissimmee team checks the surface and repairs that may be needed before recommending a suitable water repellent. Start with a free inspection to determine whether surface protection addresses your actual moisture concern.

  • A sound but absorbent masonry surface
  • Weathered brick requiring preparation
  • Water concerns after other entry points are assessed
  • A prior coating that needs identification

What the Visit Covers

  1. Surface and existing coating condition
  2. Necessary cleaning and masonry preparation
  3. Suitability of the chosen water repellent
  4. Product drying and application requirements

Proudly American

Family owned and operated, with upfront pricing and a workmanship warranty on every repair.

Call (689) 361-5599

Questions Homeowners Ask Us

Is chimney waterproofing necessary?

Chimney waterproofing is worth it when the brick is soaking up rain, which shows as damp spots, white efflorescence or flaking faces. The crown, cap and flashing must be sound first, because a repellent only protects the brick face. On a chimney that is already dry and solid, waterproofing is a preventive step rather than a repair.

How long does chimney waterproofing last?

A quality breathable water repellent on chimney brick usually lasts several years before it needs another coat. Sun, rain and the type of masonry wear it down at different rates, and the maker's instructions give the expected span. A simple test is to splash water on the brick: if it soaks in instead of beading, the coat is spent.

What is chimney waterproofing?

Chimney waterproofing is a breathable water repellent sprayed or brushed onto brick, block or stucco above the roof. It soaks into the pores and makes rain bead off, while still letting water vapor escape from inside the masonry. It is different from paint or a clear sealer, which trap moisture and cause spalling.

How much does chimney waterproofing cost?

Chimney waterproofing cost depends on how much brick sits above the roofline and how steep the roof is. The number of cracks and mortar joints to repair before the repellent goes on matters too. The repellent itself is a small part of the job. Your written estimate lists the prep work and the coating separately.

Rated 4.8 of 5 from 438 reviews
YelpFacebookGoogle

Chimney & Fireplace Brands We Work With

DuraVentOlympia Chimney and VentingCopperfield Chimney SupplyRutlandHeatilatorHeat & Glo

Book Your Free Kissimmee Inspection

  • Free inspection and written estimate
  • Upfront pricing, no hidden fees
  • Family owned and operated
(689) 361-5599

Tell us what the chimney or fireplace is doing. We will call to set up your free inspection.

Call(689) 361-5599