24/7 emergency line

Professional Chimney Tuckpointing in Kissimmee

Restore the mortar joints that hold your chimney masonry together.

Licensed and insured
Same-day service
Locally owned and operated
Family run

Call (689) 361-5599 Request an Estimate

Get a Free Written Estimate

Takes about 30 seconds

Or call us at (689) 361-5599

Signs This Job Is Due

Sound bricks can still be let down by failing mortar. Our Kissimmee chimney tuckpointing service removes deteriorated joint material and restores suitable joints between retained units. A free inspection helps establish whether repointing is enough or whether damaged bricks also need replacement.

Mortar falling from joints
Open gaps between sound bricks
Earlier surface patches breaking away

Repair the joint rather than cover its face

Chimney repointing requires the unsound mortar to be removed sufficiently for the repair to bond to suitable material. Smearing a thin layer over a crumbling joint can hide the defect without restoring it. Preparation therefore matters as much as the visible finish.

Chimney mortar repair is appropriate where the masonry units themselves can remain. A cracked or spalling brick needs a different decision. We separate those conditions so a joint-only proposal does not leave failed units behind.

Match mortar to the retained construction

Repointing the chimney masonry involves compatibility, not simply choosing a hard mix. The retained bricks, existing mortar and exposure of the joint inform the material choice. Color and tooling affect appearance, but they should not override how the repair works with the chimney.

Chimney mortar joint repair also follows the product's preparation and curing requirements. A neatly finished surface does not excuse loose material underneath or unsuitable application conditions.

Address the reason joints keep deteriorating

Repeated joint failure may accompany water entering from a crown, cap or roof connection. Tuckpointing a chimney section can restore damaged mortar without repairing those other components. If a connected fault is present, it should be addressed as its own task.

For your Kissimmee chimney, we explain which joints need work and which neighboring material remains sound. This keeps the repair focused while making any broader masonry concern clear.

What You Get When You Call Us

Tuckpointing a chimney means grinding out cracked, sandy mortar joints. Fresh mortar matched to the old brick is then packed in. On Kissimmee chimneys it is the repair for sound brick held by failing joints, and it stops rain from working into the masonry through those gaps.

Family run
A family-owned Kissimmee team takes time to understand the problem in your home.
Upfront, honest pricing
The recommended work and its price are explained before the job begins.
Workmanship warranty
Our workmanship warranty backs the repair work we complete.

Choosing the Right Repair

WhenSound brick with failed mortar

FixRepoint the affected joints

CheckPrepare back to suitable material.

WhenFailed brick beside open joints

FixCombine joint and brick repair

CheckDo not retain an unsound unit to keep the task smaller.

Materials Matched to the System

Compatible mortar: The mix must suit the retained masonry and its condition.
Joint finishing tools: The finish should be appropriate to the existing work and the repair requirements.

What Determines the Job

Extent of joint failure: Scattered joints and broad deterioration require different amounts of preparation.
Adjoining brick condition: Unit replacement adds work beyond repointing alone.

Free Inspection First. Then 10% Off the Service You Book.

Book within 72 hours of your free inspection and receive 10% off the service.

Request an Estimate

What the Visit Covers

The depth and extent of failed joints
Compatible replacement mortar
Joint finishing and curing needs

Proudly American

Family owned and operated, with upfront pricing and a workmanship warranty on every repair.

Call (689) 361-5599

How We Approach Tuckpointing

Assess the joints
Identify deteriorated mortar and check the adjacent brick.
Prepare the repair
Remove failed joint material without treating the brick face as expendable.
Repoint the masonry
Place suitable mortar in the prepared joints.
Review the finish
Explain curing and any separate water or unit damage.

Questions Homeowners Ask Us

What is chimney tuckpointing?

Chimney tuckpointing is the repair of worn mortar joints between sound bricks. The crew cuts the old mortar out to a set depth and cleans the joint. New mortar is packed in layers, then tooled to shed water. It differs from brick replacement, which removes the damaged units themselves.

How much does chimney tuckpointing cost?

Chimney tuckpointing cost depends on how many mortar joints need cutting out. Chimney height and how hard the roof is to work on also count. A few cracked joints near the crown is a small job, while repointing the whole stack is a larger one. The estimate names the area to be repointed.

How do you repair chimney mortar joints?

Chimney mortar joints are repaired in three steps. First the old mortar is ground out without chipping the brick edges, then the joint is brushed clean and dampened, and next new mortar is packed in and struck to match the old profile. The work is kept out of hard sun until it sets.

What kind of mortar do you use on a chimney?

The mortar for a chimney is chosen to match the brick, not to be as hard as possible. Type N or type S mortar suits most brick chimneys, while older soft brick needs a softer mix so the joint gives before the brick does. Mortar that is harder than the brick causes spalling.

Rated 4.8 of 5 from 438 reviews